FABCO

Engine	Units: US \| Metric

Net Power – ISO 9249	211 hp	158 kW

Engine Model	Cat® C7 ACERT™	Cat® C7 ACERT™

Net Power – 80/1269/EEC	211 hp	158 kW

Flywheel Power	211.88 hp	158 kW

Gross Power – SAE J1995	230 hp	172 kW

Net Power – SAE J1349	209 hp	156 kW

Peak Torque (Net) @ 1,400 RPM	669 ft-lb	907 N·m

Bore	4.33 in	110 mm

Stroke	5 in	127 mm

Displacement	439 in3	7.2 L


Weights

Operating Weight	42770 lb	19397 kg


Buckets

Bucket Capacities	3.25-4.25 m3 4.25-5.5 yd3	3.25-4.25 m3 4.25-5.5 yd3

Max Bucket Capacity	5.5 yd3	4.25 m3

Bucket Width	9.47 ft	2885 mm

Capacity - Reference bucket	4.25 yd3	3.25 m3

Type - Reference bucket	Material Handling	Material Handling

Breakout force of Reference bucket	35775 lb	159.1 kN


Operating Specifications

Dump Clearance	9137.11 ft	2.785 m

Static Tipping Load, Full Turn	25860.19 lb	11730 kg

Breakout Force	35775 lb	159 kN

Static Tipping Load, Full Turn - Bucket	25865 lb	11730 kg

Static Tipping Load, Full Turn - Forks	17515.71 lb	7945 kg


Transmission

Forward 1	4.3 mph	7 km/h

Forward 2	8.1 mph	13 km/h

Forward 3	14 mph	22.6 km/h

Forward 4	23.6 mph	38 km/h

Reverse 1	4.7 mph	7.6 km/h

Reverse 2	8.6 mph	13.9 km/h

Reverse 3	15.2 mph	24.5 km/h

Reverse 4	24.9 mph	40 km/h


Hydraulic System

Bucket/Work Tool System - Pump Output	71 gal/min	270 L/min

Steering System Pump Type	Piston	Piston

Hydraulic Cycle Time – Raise	6 Seconds	6 Seconds

Hydraulic Cycle Time – Dump	2.1 Seconds	2.1 Seconds

Hydraulic Cycle Time – Lower, Empty, Float Down	2.6 Seconds	2.6 Seconds

Hydraulic Cycle Time – Total	10.7 Seconds	10.7 Seconds

Pilot System - Pump Output	71.33 gal/min	270 L/min


Brakes

Brakes	Meets required standards.	Meets required standards.


Axles

Front	Fixed front	Fixed front

Rear	Oscillating +/- 13°	Oscillating +/- 13°

Maximum Single-Wheel Rise and Fall	18.5 in	470 mm


Tires

Tires	Choose from a variety of tires to match your application.	Choose from a variety of tires to match your application.


Cab

ROPS/FOPS	Meets SAE and ISO standards.	Meets SAE and ISO standards.


Service Refill Capacities

Fuel Tank – Standard	83 gal	314 L

Cooling System	11 gal	42 L

Crankcase	7.9 gal	30 L

Transmission	9 gal	34 L

Differentials and Final Drives – Front	9.5 gal	36 L

Differentials and Final Drives – Rear	9.5 gal	36 L

Hydraulic Tank	29 gal	110 L


Dimensions

Height to top of ROPS	11.33 ft	3452 mm

Height to top of exhaust pipe	11.05 ft	3369 mm

Height to top of hood	8.08 ft	2462 mm

Ground clearance	1.35 ft	412 mm

B-pin height - standard	13.53 ft	4123 mm

Center line rear axle to edge of counterweight	6.56 ft	2000 mm

Wheelbase	10.99 ft	3350 mm

Center line rear axle to hitch	5.5 ft	1675 mm

Rack back at carry	51 Degrees	51 Degrees

Rack back at ground	44 Degrees	44 Degrees

Hook reach at maximum lift - extended	10.47 ft	3190 mm

Hook reach at maximum lift - mid-position	8.82 ft	2688 mm

Hook reach at maximum lift - retracted	7.18 ft	2187 mm

Hook height at maximum lift - extended	24.89 ft	7587 mm

Hook height at maximum lift - mid-position	22.67 ft	6910 mm

Hook height at maximum lift - retracted	20.45 ft	6234 mm

Hook reach with lift arm level - retracted	13 ft	3961 mm

Hook reach with lift arm level - mid-position	15.62 ft	4761 mm

Hook reach with lift arm level - extended	18.24 ft	5561 mm

Hook height with lift arm level	6 ft	1828 mm

Hook reach at minimum lift - retracted	7.18 ft	2187 mm

Hook reach at minimum lift - mid-position	8.82 ft	2688 mm

Hook reach at minimum lift - extended	10.47 ft	3190 mm

Hook height at minimum lift - retracted	6.28 ft	1915 mm

Hook height at minimum lift - mid-position	8.33 ft	2539 mm

Hook height at minimum lift - extended	10.38 ft	3163 mm

Overall length with fork level on ground	29.91 ft	9116 mm

Overall reach with lift arm and fork level	6.39 ft	1948 mm

Tine height at maximum lift with fork level	12.52 ft	3817 mm

Tine height with lift arm and fork level	5.76 ft	1757 mm

Fork tine length	5 ft	1524 mm